Antech Calibration List
Get in touch to see which Antech instruments we are able to calibrate.
| Antech Instruments |
|---|
| Antech Resistance Standard |
| Antech Resistance Standard |
| Antech Resistance Standard |
| Antech Resistance Standard |
| Antech Resistance Standard |
| Antech Network Resistance |
| Antech Portable Workshop |
| Antech RCD Tester |
| Antech Digital Stroke Counter |
| Antech Hydraulic Flushing Unit |
| Antech Data Logger RTD Extension Cable |
| Antech Low Power High Resistance Network Jig |
| Antech Toroid |
| 0 to 100 psi 100 mm Pressure Gauge |
| 0 to 1000 mbar 4" Vacuum Gauge (capsule) |
| 0 to 1000 psi 6" Pressure Gauge |
| 0 to 15 bar 160 mm Pressure Gauge |
| 0-1 bar 67mm Pressure Gauge |
| 0-10 bar 160mm Pressure Gauge |
| 0-100 bar 6 inch Pressure Gauge |
| 0-1000 mbar 4 inch Pressure Gauge |
| 0-1000 psi 100mm Pressure Gauge |
| 0-10000 mm WG 150 mm Pressure Gauge |
| 0-150 psi 4 inch Pressure Gauge |
| 0-15000 psi 4 inch Pressure Gauge |
| 0-1600 psi 8 inch Pressure Gauge |
| 0-200 psi 4 inch Pressure Gauge |
| 0-2000 psi 4 inch Pressure Gauge |
| 0-30 psi 10 inch Test Gauge |
| 0-300 psi 4 inch Pressure Gauge |
| 0-300 psi 6" Pressure Gauge |
| 0-400 psi 4 inch Pressure Gauge |
| 0-5 bar 160mm Pressure Gauge |
| 0-50 psi 4 inch Pressure Gauge |
| 0-6 bar 4 inch Pressure Gauge |
| 0-60 psi 4 inch Pressure Gauge |
| 0-600 bar 4 inch Pressure Gauge |
| 0-600 psi 4 inch Pressure Gauge |
| 0-900 psi 63mm Pressure Gauge |
| 1/4" BSP Bonded Seal Test Fixture |
| 10" Orifice Plate |
| 100 kg Checkweight |
| 11" Orifice Plate |
| 12" Orifice Plate |
| 13" Orifice Plate |
| 14" Orifice Plate |
| 16" Orifice Plate |
| 18" Orifice Plate |
| 2" Orifice Plate |
| 20" Orifice Plate |
| 24 inch Orifice Plate |
| 250 OHM Resistor |
| 283 to 5 kg adaptor Adaptor |
| 3" Orifice Plate |
| 4 inch Orifice Plate |
| 4" Orifice Plate |
| 4.4" Orifice Plate |
| 4½" Orifice Plate |
| 50 OHM Resistor |
| 6" Orifice Plate |
| 7" Orifice Plate |
| 8" Orifice Plate |
| 8½" Orifice Plate |
| AC/DC Resistance Standard |
| Bell Prover Standards Group |
| Carriage |
| Day Rate Gas Flow Laboratory |
| High Flow Rig Standards Group |
| Hydraulic Flushing Rig |
| length standard Length Standard |
| Low Flow Rig Standards Group |
| MF1000 Adapter Kit |
| Piston Prover Standards Group |
| Pre-approved adjustment Flow Meter |
| Special High inertia mass |
| Unknown Vacuum Spacer |
| Water Rig Standards Group |
Call us on 01642 626144 or contact our team if your instrument is not listed.